Metal Bunk Beds
- Product Code: WMS-4005
- Availability: In Stock
- ₹ 0.00/-
Qty
+
-
Type of bunk beds2 – Tier bunk beds ( Fixed )
Railing / guard rail at upper bedFixed
Tail boardWith
Shape of tail boardRectangular
Head restWith
Shape of headrestRectangular
Provision of under storageNo under storage provision
Number of DrawersNo Drawer
Number of boxNo Box
Provision for mosquito net hanging rodNo mosquito net hanging rod
Components assemblyBy welding
Provision of mattress panelWith
Number of Support members for mattress panel5 Nos.
Mode of supplyKnocked Down - To Be Assembled At Consignee Site By The Seller
Structure of metal bed frame including legs and head / tails / railing /supporting structureCRCA hollow box rectangular or square sections
Vertical leg structure sectionsTube of size 38.1 mm X 38.1 mm with 1.6 mm wall thickness
Supporting structure of horizontals sectionsTube of size 50 mm X 25 mm with 1.2 mm wall thickness
Other joining horizontal structure sectionsTube of size 25 mm X 25 mm with 1.2 mm wall thickness
Stair rail sections ( For upper level )Tube of size 50 mm X 25 mm with 1.2 mm wall thickness
Stair step sectionsTube of size 25 mm X 25 mm with 1.2 mm wall thickness
Material of mattress panelPlywood oil painted
Thickness of mattress panel (if other than CRCA sheet)18 mm
Upper bed support rail sectionsTube of size 50 mm X 25 mm with 1.2 mm wall thickness
Head board sectionsTube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness
Tail board sectionsTube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness
Length of entire structure + 10 mm1950 mm
Width of entire structure + 10 mm980 mm
Height of entire structure – excluding Mosquito net holding rods (minimum ceiling clearance to be 760 mm) + 10 mm1600 mm
Actual length of bed1830 mm
Actual width of bed915 mm
Height of lower tier (Buyer should be careful while selecting keeping in mind minimum ceiling clearance as required ideally 760 mm minimum)460 mm
Guard rail height (+/- 5 MM)360 mm
Gap between beds1067 mm
Paint /Finish of Metal partsPowder Coating
Finish of head board / Tail boardPowder Coating
Min Powder/paint coating thickness (Micron)60 microns
Tags: Metal Bunk Beds